• Suitable for Lithium Manganate / Lithium Cobaltate / Lithium Ion / Lithium Polymer / Ternary battery pack.
• High-concentration conformal coating is fully covered, moisture-proof, leakage-proof, shock-proof, dust-proof, anti-corrosion, anti-aging, etc.
• Partial epoxy resin covering, enhancing waterproof, shockproof and other properties.
• The main control IC adopts a highly integrated special battery protection IC with reliable and stable protection function, low self-loss and anti-ESD.
Spec. Download• Application for: Electric Bicycles, Electric Motorcycles, Electric Tricycles, Cruiser, Solar System...
• Suitable for Lithium Manganate / Lithium Cobaltate / Lithium Ion / Lithium Polymer / Ternary battery pack.
• High-concentration conformal coating is fully covered, moisture-proof, leakage-proof, shock-proof, dust-proof, anti-corrosion, anti-aging, etc.
• Partial epoxy resin covering, enhancing waterproof, shockproof and other properties.
• The main control IC adopts a highly integrated special battery protection IC with reliable and stable protection function, low self-loss and anti-ESD.
Items | Min. | Typical | Max. | Unit | |
Charging Current | 150 | 155 | A | Customized | |
Continuous Discharging Current | 150 | 155 | A | Customized | |
Overcurrent Discharging Protection | 520 | 570 | 600 | A | |
Single Cell Self-consumption Current (3.30V) | 15 | 23 | 33 | uA | |
Single Cell Overcharge Detection Voltage | 3.8 | 3.85 | 3.9 | V | |
Single Cell Overcharge Recovery Voltage | 3.6 | 3.65 | 3.7 | V | |
Single Cell Overcharge/Overdischarge Detection Delay | 0.5 | 1 | 2 | S | |
Single Cell Overdischarge Detection Voltage | 2.2 | 2.3 | 2.4 | V | |
Single Cell Overdischarge Recovery Voltage | 2.4 | 2.5 | 2.6 | V | |
Balanced Starting Voltage | 3.56 | 3.6 | 3.64 | V | |
Balanced Starting Current | 38 | 43 | 48 | mA | |
Short Circuit/Overcurrent Protection Recovery Condition | Automactic recovery after removed load | ||||
Overcharge (Overdischarge) Recovery Condition |
(disconnect discharge load) all single cell voltage drop to overcharge recover y (rise to over discharge recovery) voltage |
||||
Dimension | L=140±0.5mm,W=110±0.5mm,H≤32mm |