• Suitable for Lithium Manganate / Lithium Cobaltate / Lithium Ion / Lithium Polymer / Ternary battery packs.
• High-concentration conformal coating is fully covered, moisture-proof, leakage-proof, shock-proof, dust-proof, anti-corrosion, anti-aging, etc.
• Partial epoxy resin covering, enhancing waterproof, shockproof and other properties.
• The main control IC adopts a highly integrated special battery protection IC with reliable and stable protection function, low self-loss and anti-ESD. Each battery has an independent balance function
• Application for: Electric Bicycles, Electric Motorcycles, Scooters, Electric Tools Solar System...
• Suitable for Lithium Manganate / Lithium Cobaltate / Lithium Ion / Lithium Polymer / Ternary battery packs.
• High-concentration conformal coating is fully covered, moisture-proof, leakage-proof, shock-proof, dust-proof, anti-corrosion, anti-aging, etc.
• Partial epoxy resin covering, enhancing waterproof, shockproof and other properties.
• The main control IC adopts a highly integrated special battery protection IC with reliable and stable protection function, low self-loss and anti-ESD. Each battery has an independent balance function
Items | Min. | Typical | Max. | Unit | |
Charging Current | 20 | 22 | A | Customized | |
Continuous Discharging Current | 20 | 22 | A | Customized | |
Overcurrent Discharging Protection | 46 | 51 | 56 | A | |
Overcurrent Discharging Protection Delay | 300 | 500 | 700 | mS | |
Single Cell Self-consumption Current (3.30V) | 15 | 25 | 33 | uA | |
Single Cell Overcharge Detection Voltage | 4.2 | 4.25 | 4.3 | V | |
Single Cell Overcharge Recovery Voltage | 4.1 | 4.15 | 4.2 | V | |
Single Cell Overcharge Detection Delay | 0.5 | 1 | 2 | S | |
Single Cell Overdischarge Detection Voltage | 2.65 | 2.7 | 2.75 | V | |
Single Cell Overdischarge Recovery Voltage | 2.9 | 3 | 3.1 | V | |
Single Cell Overdischarge Detection Delay | 0.5 | 1 | 2 | S | |
Short Circuit/Overcurrent Protection Recovery Condition | Automactic recovery after removed load | ||||
Overcharge (Overdischarge) Recovery Condition | (disconnect discharge load) all single cell voltage drop to overcharge recover y (rise to over discharge recovery) voltage | ||||
Dimension | L=56.3±0.5mm,W=26±0.5mm,H≤5mm |